Table of Contents
Advertisement
To create an index name
1
Use V/v/B/b to create an index name.
Press V/v to select a character, then press
B/b to move the cursor to the next position.
If you made a mistake
Press B/b until the character you want to
change flashes, then press V/v to select the
correct character.
Tips
• You can select the character type as follows by
pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press
selecting a character.
2
Press
.
The entered name is registered.
Using the Control for
HDMI function for
"BRAVIA" Sync
To use "BRAVIA" Sync, set the Control for
HDMI function as explained below.
By connecting Sony components that are
compatible with the Control for HDMI
function with an HDMI cable (not supplied),
b
operation is simplified as follows:
without
• One-Touch Play: When you play back a
• System Audio Control: While watching TV,
• System Power Off: When you turn off the
Control for HDMI is a mutual control function
standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-
Definition Multimedia Interface).
The Control for HDMI function
does not work in the following
cases:
• When you connect the receiver to a
• When you connect the receiver and
We recommend that you connect the receiver
to products featuring "BRAVIA" Sync.
Note
Depending on the connected component, the
Control for HDMI function may not work. Refer to
the operating instructions of the component.
Control for HDMI
component such as a DVD/Blu-ray disc
player, the receiver and the TV are turned on
automatically and switched to the
appropriate HDMI input.
you can select to output the sound from the
TV speaker or the speakers connected to the
receiver.
TV, the receiver and connected components
are also turned off simultaneously.
component which does not correspond with
Sony Control for HDMI function.
components using other than HDMI
connection.
59
GB
Hide quick links:
Advertisement
Table of Contents
