Using Google Cast; Using The Control For Hdmi Function For "Bravia" Sync - Sony HT-XT3 Operating Instructions Manual

When using an Android device
1
Search, download and launch
SongPal application on Android
device.
2
Connect the system and Android
device by BLUETOOTH connection
(page 12) or network connection
(page 16).
Tip
If you connect the system and Android
device by network connection, connect
the device by Wi-Fi to the same network
as that of the system.
3
Follow the instructions on SongPal.
When using an iPhone/iPod
1
Search, download and launch
SongPal application on iPhone/iPod.
2
Connect the system and iPhone/iPod
by BLUETOOTH connection (page 12)
or network connection (page 16).
Tip
If you connect the system and iPhone/
iPod by network connection, connect
the iPhone/iPod by Wi-Fi to the same
network as that of the system.
3
Follow the instructions on SongPal.
Listening to the same music
on multiple devices/
listening to different music
in a different location
(SongPal Link)
You can enjoy music stored on your
computer or smartphone or from music
services in multiple rooms at the same
time.
For details on SongPal Link, please visit
the following URL:
http://www.sony.net/nasite

Using Google Cast™

Google Cast allows you to select music
content from the Google Cast™ Ready
app and play back on the system.
Google Cast requires the initial setup
using SongPal.
1
Download SongPal to the device.
2
Start SongPal, and then connect
the device by Wi-Fi to the same
network as that of the system.
3
Perform the initial setup on the
device following the instructions
from SongPal.
4
Start the Google Cast Ready app
on the device, and then select this
system to play back content.
Note
You cannot use Google Cast while
"GOOGLE CAST UPDATING" appears in the
front panel display. Wait until the update is
complete, and then try again.
Using the Control for
HDMI Function for
"BRAVIA" Sync
This function is available on TVs with the
"BRAVIA" Sync function.
By connecting Sony products that are
compatible with the Control for HDMI
function via an HDMI cable, operation is
simplified with the features below.
You can enable the Control for HDMI
function by setting [Control for HDMI] to
[On] (page 26).
31
US