Toshiba Satellite P500 Maintenance Manual page 202

Replacement Procedures
Installing a Wireless LAN card
The following describes the procedure for installing a Wireless LAN card.
1. Insert a wireless LAN card terminals slantwise into the connector on the computer
and press a wireless LAN card and lock the secure screws.
2. Connect the wireless LAN antenna cable to the terminals on a wireless LAN card.
3. Put the wireless LAN antenna cable on the right location from the guide (Antenna
cable locate top, USB cable locate bottom and FM cable locate middle).Stick the tape
of cable on the surface. If fail to stick, replace tape with new adhesive tape.(see
Figure 4-9-3)
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
Figure 4-9-3 Cables layout on motherboard
4-30