Toshiba Satellite P500 Maintenance Manual page 189

Replacement Procedures
Installing an optical disk drive
The following describes the procedure for installing an optical disk drive.
1. Attach the ODD bracket to an optical disk drive and secure it with the following
screws.
• M2.0×3.0 Flat BIND screw
2. Insert an optical disk drive assembly into the slot and connect it to the connector
CN26 on the system board.
3. Secure the ODD drive with the following screw.
• M2.5X5.0 Flat BIND screw
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
Figure 4-5-2 Disassemble the side bracket
4-17
x2
x1