Keyboard - Toshiba Satellite P500 Maintenance Manual

Replacement Procedures
4.8

Keyboard

Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-8-1).
CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the
frame and do not touch the keycap.
1. Upside down the computer.
2. Open the display.
3. Remove KBD holder. Insert your finger into the slot between the KBD holder and the
keyboard. Then, lift up the keyboard cover to remove it.
4. Loose the screw securing KBD Holder.
M2.5x3.0B
5. Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to
remove it.
6. Disconnect keyboard cable.
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
Flat BIND screws x4
4-25