Uniden DG900 DGMax Owner's Manual page 12

Your phone may be used with optional
headset, the Uniden HS
Use only the Uniden HS910
CTA 630
or CTA630 headset.
To use this feature, simply insert the
headset plug into the headset jack.
Your headset is ready for hands-free
conversations.
To prevent other parties from making unauthorized calls on your
phone line, a digital code was added to the DG900 Your phone's
Keep headset wire away
from base antenna.
handset and base share this code, which is randomly set each time you
place the handset in the charging cradle.
To reestablish communication between the handset and the
base in the event of a power failure
Restore power to the base.
1)
2) Place the handset on the base. The digital security code is reset.
you
If are using an optional
headset, you must still use
the handset keypad for
phone operations.
20
or Uniden
910,
Pick the handset.
To answer up
a call
1) Pick up the handset.
talk
2) Press
To make a call
3)
Listen for the dial tone.
4) Dial the number.
talk or return the handset to the
Press
To hang up base (AutoStandby).
1)
Pick the handset.
up
talk
2) Press
To
redial
3)
Listen for the dial tone.
4) redial
Press
If you have "call waiting" service
and a call waiting tone sounds
while you are on a call, press
flash then 2 to accept the waiting
call. There is a short pause, then
you will hear the new caller. To
return to the original caller,
press flash then 1.
p the current call and picks up the incoming call or
Press any button.
Press talk
1)
2) Listen for dial the tone.
3) Dial the number.
talk
1) Press
2) Listen for the dial tone.
redial
3)
Press
21