Using This Manual - Galil DMC-3xx10 Installation Manual

Using This Manual

This manual provides information for the wiring, installation, powering-up, and basic communication
to the DMC-3xx10, DMC-3xx11 and DMC-3xx12 series motion controllers. The following list of part
numbers are examples of configurations of the DMC-3xx1x motion controller that are covered in this
manual.
DMC-30010: 1-axis controller no power supply, no amplifier.
DMC-30011: 1-axis controller with 48VDC power supply, no amplifier.
DMC-30012: 1-axis controller with 60VDC power supply and sine amplifier
This manual covers the basic installation of the controller and amplifier modules. For full operational
information including specific I/O installation, detailed programming examples and additional internal
driver information, see the DMC-3xx1x User Manual.
WARNING: Machinery in motion can be dangerous! It is the responsibility of the user to
design effective error handling and safety protection as part of the machinery. Galil shall
not be liable or responsible for any incidental or consequential damages.
If the DMC-3xx1x motion controller and included amplifiers or stepper drivers are not used
in a manner specified by Galil Motion Control, the protection provided by the controller,
amplifiers and drivers may be impaired.