Using This Manual - Galil DMC-41x3 Installation Manual

Using This Manual

This manual provides information for the wiring, installation, powering-up, and basic communication
to the DMC-41x3 motion controller with the Galil internal amplifiers, AMP-435x0 and AMP-432x0.
The following list of part numbers are examples of configurations of the DMC-41x3 motion controller
that are covered in this manual.
DMC-41x3
DMC-41x3-D3220
DMC-41x3-D3240
DMC-41x3-D3520
DMC-41x3-D3540
DMC-41x3-D3240-D3220
DMC-41x3-D3240-D3240
DMC-41x3-D3540-D3520
DMC-41x3-D3540-D3540
DMC-41x3-D3240-D3520
DMC-41x3-D3240-D3540
DMC-41x3-D3540-D3220
DMC-41x3-D3540-D3240
This manual covers the basic installation of the controller and amplifier modules. For full operational
information including specific I/O installation, detailed programming examples and additional internal
driver information, see the DMC-41x3 User Manual.
WARNING: Machinery in motion can be dangerous! It is the responsibility of the user to
design effective error handling and safety protection as part of the machinery. Galil shall
not be liable or responsible for any incidental or consequential damages.
If the DMC-41x3 motion controller and included amplifiers or stepper drivers are not used
in a manner specified by Galil Motion Control, the protection provided by the controller,
amplifiers and drivers may be impaired.
Caution:
The DMC-41x3 controller with internal servo amplifiers
contain hot surfaces.