Edimax NS-2501 User Manual page 9

ON
Off
USB2
Slow
Flashing
Fast
Flashing
ON
Off
HDD
Slow
Flashing
Fast
Flashing
this situation, the LED will keep flashing about 30 seconds
and go off).
USB storage device is connected to USB2 port
USB storage device is not connected to USB2 port or is not
detected due to hard disk failure or the system is doing
partition/format on this hard disk drive.
The used space of the USB mass storage is over 95% or
the USB Copy tool is copying from the USB mass storage
device plugged to USB2 port.
The USB mass storage is full or the USB Copy tool is
copying from the USB mass storage device plugged to
USB2 port, but this job faces some error and is stopped (In
this situation, the LED will keep flashing about 30 seconds
and go off).
Internal SATA hard disk drive is installed
Internal SATA hard disk drive is not installed or is not
detected due to hard disk failure or the system is doing
partition/format on this hard disk drive.
The used space of the internal SATA hard disk drive is over
95%.
The internal SATA hard disk drive is full.
8