Edimax NS-2501 User Manual page 8

4. LED
On the storage server's front panel there are LEDs, which show the status of
this storage server. Below is the list of each LED and its description.
NS-2501
Light
LED
Status
Power
Flashing
LAN
Flashing
Status
Flashing
USB1
Flashing
Flashing
ON Storage server is powered on
Off Storage server is shut down
Storage server is starting; or the storage server is shutting
Slow
down; or the storage server is restoring its settings to
factory default values.
ON LAN port is connected
Off LAN port is unconnected
Data is transferring through the network
ON The storage server is working well
The storage server is not ready to provide service. Please
Off
go to the Web GUI to configure the storage server.
The storage server has some problem. Please go to the
Slow
Web GUI to check the status of the system to find out the
problem.
ON USB storage device is connected to USB1 port
USB storage device is not connected to USB1 port or is not
Off detected due to hard disk failure or the system is doing
partition/format on this hard disk drive.
The used space of the USB mass storage is over 95% or
Slow
the USB Copy tool is copying from the USB mass storage
device plugged to USB1 port.
The USB mass storage is full or the USB Copy tool is
Fast
copying from the USB mass storage device plugged to
USB1 port, but this job faces some error and is stopped (In
NS-2502
Description
7