Front Panel - Edimax NS-2501 User Manual

Note: After you shut down the storage server and before switch off the power, the storage
server is still providing power to the hard disk drives and the hard disk drives are still running.
You have to switch off the power after you shut down the storage server to make the whole
system completely stopped.

Front Panel

NS-2501
1. Release button
The Release button has three functions: (1) unplug the external USB mass storage, (2) shut
down the storage server, and (3) reset the configuration of the storage server to factory default
settings.
Unplug the external USB mass storage: When you press and hold Release button for 2
seconds, the storage server will beep for 0.5 second to hint that your command is detected.
At this time, you should release the Release button immediately if you want to unplug the
external USB mass storage device plugged in USB1 port. The storage server will take
several seconds to unplug the USB mass storage. When the LED of the USB1 port goes off,
you can safely detach the USB mass storage device from this storage server.
Shut down the storage server: You should press and hold Release button for more than
5 seconds to start shutting down the storage server. Please ignore the beep sound. The
Power LED will keep flashing during the shutting down process. When the Power LED goes
off, the storage server is completely shut down. You can now switch off the power by switch
the Power switch to "0".
Restore factory default settings: If you want to reset the configuration of the storage
server to factory default settings, you should press and hold BOTH the Release button and
the Copy button at the same time for more than 5 seconds, the storage server will beep for
2 seconds to hint that your command is accepted. The Power LED will keep flashing during
the restore process. After the restore is complete, the storage server will restart itself
automatically.
NS-2505
5