PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. PRODUCT FEATURES Thank you for purchasing this Maxell Bluetooth Headphone! The MXH-BT600E is a Bluetooth headphone with the following features: Wireless playback of music from your Bluetooth enabled mobile phone via the Bluetooth connection ...
1. Keep your headset and phone within 1 meter when pairing; 2. Press and hold the MULTIFUNCTIONAL button for about 8 seconds to enter the MXH-BT600E into pairing mode when it is off. The LED will flash red and blue alternatively. Your Bluetooth enabled device can now scan and connect to “MAXELL MXH-BT600E”...
HEADPHONE OPERATIONS Using the MXH-BT600E with Bluetooth mobile phones 1. Answer a call: When there is an incoming call, your ring-tone will sound from the headphone and Blue LED will flash quickly. Short press the multifunctional button to answer the call. Blue LED flashes once quickly every 4 seconds.
Page 5
Bluetooth devices, select and then connect wirelessly by PIN 1. Keep your headset and the device within 1 meter when pairing; 2. Make the headset to enter pairing mode (Please refer to “PAIRING THE MXH-BT600E” in previous page); 3. Turn on the Bluetooth devices, it will be searched automatically and will receive a pairing request(depends on model types) 4.
Recharging the internal battery After prolonged use, the internal battery will become weak. When the battery power the headphone MXH-BT600E of is very low, the Indicator LED will flash red and a melody will play alerting you to recharge the device.
TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if an unnatural color shifts or image distortion occurs. MXH-BT600E Note and Care Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
No Sound phone. The MXH-BT600E Relocate the MXH-BT600E within Bluetooth placement is out of range. operating range (30 feet). Volume set too low. Increase the volume of your device. Volume level is set too high.
FACTORY RESET With the MXH-BT600E switched off, long press MULTIFUNCTION BUTTON AND PAUSE BUTTON for 8 seconds simultaneously and release it until the RED and BLUE LED turn on. Normal Resetting If the product is working abnormally, you can plug the 3.5mm Line-in or charge the headset so to reset it.
Page 10
Maxell Europe 2 Year Warranty Maxell warrants this product to be free from all defects for the first 2 years of the lifetime of this product. Warranty is not valid for normal wear or damage due to accident, abnormal use, misuse, or neglect. Any defective item will be replaced at no charge if returned with proof of purchase to an authorized Maxell dealer or Maxell Europe Ltd.,...
Need help?
Do you have a question about the MXH-BT600E and is the answer not in the manual?
Questions and answers