Spare Battery Charger/Power Backup Function - Gigaphone 2652 Instructions Manual

Spare Battery Charger/Power Backup Function

The 2652 can use the spare battery in the Base Unit to provide operational
backup in the event of a power failure. With a fully charged battery pack in
the spare battery charger, you will still be able to place and receive calls from
the Handset for up to 3 hours.
The spare battery pack can also be used to replace a drained Handset battery,
ensuring uninterrupted use.
A spare battery can be purchased from most retail stores that carry
electronic equipment.
NOTE :
When using the 2652 during Power Backup mode, audio quality may be
compromised due to reduced Power availability. The Base Unit can't be used
when power backup mode.
1
1. Open the spare battery charger by
pressing the release button, located
on the right-hand side of the Base
Unit. A drawer will open to reveal the
spare battery compartment.
2. Place a battery pack in the drawer
with the charge contacts facing up
and to the left.
3. Push the drawer closed
The spare battery takes 24 hours to
fully charge a drained battery.
3
CAUTION: TO CAUTION: TO
BATTERY
INSTALL
REDUCE RISK OF FIRE, REDUCE RISK OF FIRE,
THIS
SIDE UP USE ONLY VTECH USE ONLY VTECH
80-5017-00-00 80-5017-00-00
2
BATTERY
INSTALL REDUCE RISK OF FIRE, REDUCE RISK OF FIRE,
THIS
SIDE UP USE ONLY VTECH USE ONLY VTECH
9
.
CAUTION: TO CAUTION: TO
80-5017-00-00 80-5017-00-00