Timer Operation; Example Of Timer Setting - Pridom PFCM123HX Owner's Manual

Timer operation

press the TIMER ON button can set the auto-on
time of the unit. And press the TIMER OFF button
can set the auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote
AUTO
TEMP.
COOL
SET
controller shows TIMER ON, the last Auto-on
DRY
CLOCK
HEAT TIMER setting time and the signal "HOUR" will be shown
HOUR ON OFF
FAN
on the LCD display area. Now it is ready to reset
MODE FAN SPEED the Auto-on time to START the operation.
M
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases in 30 minutes increments, up
1 to 10 hours, then at 1 hour increments up to 24
SWING V SLEEP
TIMER ON
hours.
2
TURBO
SWING H
TIMER OFF
3. After setting the TIMER ON ,there will be a one-
I FEEL LED
SELF CLEAN CLOCK
half second delay before the remote controller
RESET LOCK
transmits the signal to the heat pump. Then,
after approximately another 2 seconds, the
signal "HOUR" will disappear and the set temper-
ature will re-appear on the LCD display window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "HOUR" will be shown
on the LCD display area. Now it is ready to
reset the Auto-off time to START the operation.
2. Push the TIMER OFF button again to set desired
Auto-off time. Each time you press the button,
the time increases in 30 minutes increments, up
to 10 hours, then at 1 hour increments up to 24
hours.
3. After setting the TIMER OFF ,there will be a one-
half second delay before the remote controller
transmits the signal to the heat pump. Then,
after approximately another 2 seconds, the
signal "HOUR" will disappear and the set temper-
ature will re-appear on the LCD display window.
11 11
IMPORTANT
The effective operation time set by the remote controller for the timer
function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0,
3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13,
14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.

Example of Timer setting

TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want
TIMER
the unit to turn on automatically before say when
HOUR ON
you return home. The heat pump will automa-
tically start operating at the set time.
Start
Example:
Off To start the heat pump in 6 hours.
1. Press the TIMER ON button, the last setting of
Set starting operation time and the signal "HOUR" will
6 hours later
show on the display area.
2. Press the TIMER ON button to display "6.0" on
the TIMER ON display of the remote controller.
3. Wait for 3 seconds and the TIMER ON indicator
stops flashing and this function is activated. The
digital display area will show the tempera ture
again.
12 12