Page 1
HEAT PUMP REMOTE CONTROLLER ILLUSTRATION PFCM123HX PFCM183HX PCM123HX PCM183HX The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. Thank you very much for purchasing our heat pump.
CONTENTS Handling the remote controller Location of the remote controller. Use the remote controller within a distance of 8 Handling the remote controller ............meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. Remote controller Specifications........... Keep the remote controller where its signals can Function buttons ....
Function buttons Remote Controller Specifications ON/OFF Button Operation starts when this button is pressed and stops when this button is pressed again. Model RG05F2/BGEU1 MODE Button Each time the button is pressed, the operation AUTO Rated Voltage mode is selected in a sequence of following: COOL 3.0V(Dry batteries R03/LR03 2) AUTO...
Page 4
Function buttons(continued) TIMER ON Button Press this button to activate the Auto-on time When the I FEEL function is activated, the setting. Each press will increase the time setting remote display is actual temperature at its in 30 minutes increments, up to 10 hours, then at location.
Indicators on LCD How to use the buttons Before you start operating the heat pump, set Mode display the clock of the remote controller using the proce- Displays the current operation mode. Including dures given in this section. The clock panel on the AUTO( ), COOL( ), DRY(...
Auto operation Dehumidifying operation Ensure the unit is plugged in and power is Ensure the unit is plugged in and power is available. The OPERATION indicator on the available. The OPERATION indicator on the display panel of the indoor unit starts flashing. display panel of the indoor unit starts flashing.
Timer operation IMPORTANT press the TIMER ON button can set the auto-on The effective operation time set by the remote controller for the timer time of the unit. And press the TIMER OFF button function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, can set the auto-off time of the unit.
Page 8
TIMER ON TIMER OFF TIMER OFF (Off Start Stop operation) (Auto-off Operation) TIMER This feature is useful when you want to start TIMER The TIMER OFF feature is useful when you want HOUR the heat pump before you wake up and HOUR the unit to turn off automatically after you go to bed.