NOTE: On newer VLV models the breather
tube will be a straight hose.
OPTIONAL
PRE-FILTER
PARTS IDENTIFICATION
This is a parts breakdown of a typical VLV engine. Use this parts
breakdown to identify parts. When ordering parts always refer to the
engine model and specification number stamped on the engine blower
housing.
Carburetor and starter breakdowns are found in the chapters referring
to their repair.
2
MODEL and SERIAL
NUMBERS HERE
Not For Resale
www.SmallEngineDiscount.com
SBV-XXX
SER-XXX
NOTE: If the short block has been
replaced, an identification tag for service
parts is located on the valve box cover.