Basic Installation Steps - Jensen XRS Series Owner's Manual

INSTALLATION

Basic Installation Steps

Step 1 : Remove existing speaker.
Step 2 : Position new speaker and align with existing
mounting holes.
Step 3 : Attach the positive (+) and negative (-) speaker
terminals (see FIGURE 2). Be sure to observe
proper polarity when connecting the wires.
Step 4 : If not using factory grilles, attach grille.
Step 5 : Mount speaker (using factory hardware when
possible).
Step 6 : Reconnect negative battery terminal.
FIGURE 1 - DOOR PANEL INSTALLATION
Door Panel
Grille
Speaker
FIGURE 2 - CONNECTING SPEAKER WIRES
Push terminal UP to insert speaker wire.
FIGURE 3 - REAR DECK INSTALLATION
3
(+) (-)