Memory Configuration Table; Installation Of Expansion Cards - SOYO SY-K7VME Quick Start Manual

Configure Memory
Step 2.
Your board comes with Two DIMM sockets, providing support for up to 2GB of main memory using
unbuffered and non-ECC DIMM modules. On this motherboard, DRAM speed can be set
independent from the CPU FSB speed.

Memory Configuration Table

Number of Memory
Modules
RAM Type
Memory Module Size (MB)

Installation of Expansion Cards

Step 3.
The motherboard has 1 AGP slot, 1 CNR slot and 2 PCI slots.
1. Read the related expansion card's instruction document before inserting the expansion
card into the computer.
2. Press the expansion card firmly into expansion slot in the motherboard.
3. Make sure the metal contacts on the card are correctly seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install driver for the operating system you use.
Note: AGP cards working on 3.3V are not supported. Only AGP cards working on
1.5V can be used in this M/B. For AGP card voltage specification, please check the
AGP card manual or contact your AGP card's manufacturer.
SY-K7VME/K7VM333 Quick Start Guide
DIMM 1
DDR RAM PC2100/PC2700
(non-register & non-ECC)
128 / 256 / 512 / 1024 MB
13
DIMM 2