Operating The Unit; Ipod Operation; Clock Setting; Function Select - TDK iCUBIC Setup Manual

Operating the Unit

When you first plug the unit into the AC outlet, the unit will be in standby mode. You can press the
standby button on the unit (or on the remote control) to switch the unit ON or OFF. Pull the AC plug out
of the wall socket if you want to switch off completely.
Power/Standby
• Press the standby button on the unit (or remote control) to switch the unit on.
• Select the sound (iPod, AUX, or Tuner) by pressing the function button.
• Adjust the volume with the volume (up or down) button.
• Set the present equalizer (classic, rock, jazz, pop or flat) with the EQ button on the remote control.
• Press the standby button again to turn off the unit.

Clock Setting

During the unit in standby mode:
• Press the clock button until the time displays 12-hour or 24-hour digit flashing.
• Press and hold the clock button until the time displays hour digit flashing.
• Press the skip/search (down or up) button to adjust hour digit.
Press the clock button once again, the time display minute digit flashes, press the tuning/scan (
or ) button to adjust minute digit.
• Press the clock button once again to confirm the time.
Note: Each enable state as shown above will be cleared if the key is not pushed in 10 seconds.

Function Select

Press the function button to select the desired mode. Display changes as below:
iPod
11
AUX Tuner

iPod Operation

During standby mode
• Insert the iPod players in the iPod connector dock securely.
• Power on the unit, and then press the function button to the iPod mode. The iPod indicator will
appear on the unit display.
During iPod mode
• Press the play/pause button once to start the iPod playing.
Adjust the volume control by pressing the volume (up or down) button.
• Press the play/pause button once to pause the current track. To resume the playback, press the
play/pause button once again.
• To skip forwards or backwards, press the skip/search (
• Press the repeat/mono/st. button to make the iPod playing repeatedly.
How to select the iPod menu mode
• While the unit is in iPod mode, press the menu button once on the remote control and then the unit
will enter the iPod menu function.
• Press the preset/arrow (up or down) button to skip the current menu on the remote control only as
below:
Music > Extras > Photo Import (excluding the iPod Mini) > Settings > Shuffle
Songs > Backlight > Now Playing will show on the iPod player display.
• Press the select button once to select the desired menu folder on the remote control only.
• Press the preset/arrow (up or down) button again to search the current content in the each desired
menu folder.
• If you want return to the iPod menu, press the menu button again.
Charging the iPod player battery through the main unit
• If the iPod player has an internal non-removable battery, the battery may need to be charged if it
hasn't been used for a while.
• You can charge the iPod player through the main unit automatically under the standby or power on
mode.
Note: The iPod player battery is 80-percent charged in about an hour, and fully charged in a few
hours. If you charge it while playing music, it may take longer.
Note:
• At any time when the unit is in "iPod" or "iPod menu" mode, you may control the iPod player via the
main unit, remote control or iPod player.
• At all times, the iPod player must be docked propely to avoid damage to either the unit or iPod player.
or ) button to select the desired track.
12