Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
D
H
ELTA
The
major assembly in the field. For the purpose of safe shipping and transit, some parts such as the
briquette trays and rotisserie components are wrapped inside the grill and require minor assembly.
Check to ensure that all packaging material have been removed prior to grill operation.
TO INSTALL BRIQUETTE TRAYS:
TO INSTALL BRIQUETTES TRAYS
1. Briquettes trays and grill hex grates already installed but
1. Put briquette trays into the grill above the burner, as
packaging material may be needed to be removed.
shown by placing lining up the screws and the notches.
2. Put the briquette trays with the briquettes into the grill abhe
burner, as shown.
2. On some models, install the briquette tray trims to hold
3. Place the hexagonal grates directly above the the square
them in place and protect the burners from grease.
openings on the grates are a
3. Then put the stainless steel grates over the briquette trays.
WARMING RACK LEVEL POSITIONS:
The warming rack may be used to keep food warm
and avoid overcooking the food. To install the
warming rack, use the hook to latch on at the rear
hood panel as shown.
When the warming rack is not in use, it should be
stored at a safe place and out of the way.
EAT
Grill is produced fully assembled and tested in the factory and requires no
– D
H
G
G
ELTA
EAT
AS
RILL
13
Hide quick links:
Advertisement
Table of Contents
