Assembly Instructions; Briquette Tray; Warming Rack - Delta Heat DHBQ26G-B Installation, Use & Care Manual

ASSEMBLY INSTRUCTIONS

D H
The ELTA EAT
assembly in the field. For the purpose of safe shipping and transit, some parts such as the briquette trays
and rotisserie components are wrapped inside the grill and require minor assembly.
Check to ensure that all packaging material have been removed prior to grill operation.
TO INSTALL BRIQUETTES TRAYS
1. Put briquette trays into the grill above the burner as shown by lining up the tab with the channel of
the briquette tray.
2. Then put the stainless steel grates over the briquette trays.
TAB
WARMING RACK LEVEL POSITIONS:
The warming rack may be used to keep food warm and avoid overcooking the food. To install the
warming rack, use the hook to latch on at the rear hood panel as shown below (Fig. 3)
When the warming rack is not in use, it should be installed in a stow-away position (Fig. 4).
Fig. 3
Grill is produced fully assembled and tested in the factory and requires no major
– D H
ELTA EAT
Fig. 4
13
G G
AS RILL
CHANNEL