Portable Lp Connection - Delta Heat DHBQ26G Installation, Use & Care Manual

PORTABLE LP CONNECTION

 NOTE: Use only a 20-lbs. (5 gallon capacity) gas
cylinder.
 WARNING: DO NOT PLACE MORE THAN ONE
CYLINDER IN THE BASE CABINET ENCLOSURE
AT ANY TIME.
 WARNING: DO NOT USE A DENTED OR RUSTED
LP CYLINDER.
 NEVER USE A CYLINDER WITH A DAMAGED
VALVE.
 ALWAYS CHECK FOR LEAKS AFTER
CHANGING THE LP CYLINDER.
 THE LP PRESSURE REGULATOR AND HOSE
SUPPLIED WITH THIS UNIT MUST BE USED
WITHOUT ALTERATION.
1) To install the gas cylinder, place the cylinder onto the provided cutout.
2) Check to ensure that the tank's gas valve on top of the cylinder is closed.
3) Connect the LP regulator (included) to the cylinder and hand-tighten only. Open the
tank valve and make sure all connections are leak tight using a soapy water solution
and a brush. (Reference page 8 for leak test procedure).
6
– D H G G
ELTA EAT AS RILL