Integration Into Network (Lan) - HomeMatic HMW-LGW-O-DR-GS-EU Installation And Operating Manual

7

Integration into network (LAN)

To establish communication between your HomeMa-
tic Central Control Unit and the HomeMatic Wired
devices, the HomeMatic RS485 Gateway has to be
integrated into the network. To do this, proceed as
follows:
Configuration via HomeMatic Central Control Unit
• Open the „WebUI" user interface in your browser.
• In the WebUI, please click „Settings"
control"
• In the next window under „General settings", please
click on „Add".
• In the next window, select the type „Wired: Home-
Matic Wired RS485 Gateway". Afterwards, enter
the serial number and the security key of your
HomeMatic Wired RS485 Gateway. These can be
found on the stickers of your HomeMatic RS485
Gateway. The security code can be changed after-
wards.
• Please confirm with „OK" and in the next window
with „Save".
• The Gateway has been integrated successfully into
the network if the IP address is displayed and the
status is „Connected".
42
„LAN Gateway Settings".
„System