D-Link DI-704 Quick Installation Manual page 6

Ethernet modem

Hide thumbs Also See for DI-704:

Enlarged version

B. Click the Gateway tab. Clear all of the gateway settings. Click on the OK button.

C. Disable DNS settings

D. Launch Netscape or Internet Explorer. You must use Netscape 4.0 or Internet

Explorer 4.0 or higher. If you are using proxy settings, either remove the proxy

settings or add the IP address of the DI-704 into the exceptions box. Type the DI-

704's IP address (default is: http://192.168.0.1) in the Location (for Netscape) or

Address (for IE) field and press ENTER.

Key in the system password (the factory default setting is "admin") in the System

Password field and click on the Log in button.

Press the Setup button and the following screen will be shown.

G. Press the Change ... button, select PPPoE over Ethernet, and then press the Save

button. The following screen will be shown.

H. Key in the proper values for the setting items shown on the page. For the meaning

of the items, please press the Help button or refer to the User Manual – Chapter

4.4. After all of the items are set, press the Save button and reboot the DI-704.

You have now configured the DI-704. Refer to the User manual to review features and

operation instructions that you may need for your use.

-5-