Tenda Multifunctional Broadband Router User Manual page 6

Multifunctional Broadband Router User Guide
4. On this page, there are two
options for IP settings : "Obtain
an IP address
automatically(O)" and "Use the
following IP address(S)"
A： If you select "Obtain an IP
address automatically(O)",
please refer to the figure on the
right.
B：If you select "Use the
following IP address(S)", you
have to input below
parameters respectively:
IP address:192.168.0.XXX
(XXX is among 2~254)
Subnet Mask: 255.255.255.0
Default gateway: 192.168.0.1
Also there are two ways for
DNS settings, Please select
"Use the following DNS server
addresses".
Preferred DNS Server: Please
input the DNS server address
provided by ISP. Please
contact your ISP for this
information if you are not clear.
Alternate DNS Server: If you
have a secondary DNS Server
4