Step3
Focus and Shoot
3.1
Press
the shutter-release button halfway,
stopping when you
feel resistance.
When a face is detected:
•
The camera focuses on
the
area indicated by the
yellow double border (focus area), and the double
border changes to green.
When a face is not detected:
•
The camera
has
nine
focus areas,
and automatical ly
selects
the focus
areas containing
the
subject
closest to the camera. When the subject
is
in
focus,
D
(focus areas) glow green to indicate the areas of
the frame that the camera is focusing on (up to
nine
areas).
Focus area Flash lamp
Shutter
speed
Aperture
value
•
When
the camera is
unable to
focus, the focus area
will blink red.
Modify the
composition and
press
the shutter-release button halfway
again.
Flash lamp
The flash lamp
indicates
flash status when
the
shutter-release button is
pressed
halfway.
I
On
Flash will fire when picture is taken.
•
I
•
•
•
~0
--
Blinking
Flash charging.*
•
•
•
I
•
Off
Flash will not fire when picture is taken .
I
* If the battery
is
low, the monitor will turn off
in
order to save
power
while the
flash
is
charging.
Shooting and Playback •