Optional Keys For Telephone Calls - E.F. Johnson Company MULTI-NET II Quick Reference Manual

LCK (Lock)
Pressing this switch changes the scan list status of either the displayed system or group, depending on which was
selected last. (Group scan must be programmed to delete a group.) To add all deleted systems or groups of the current
system back into the scan list, press this key for 2 seconds or more (see "Scan List Programming" description). Pressing
the 2ND (RTN) key and then this key enables optional voice encryption (see "Voice Encryption" description).
Speaker and Microphone
The internal speaker and microphone are located behind the grille at the locations shown.
Battery Pack
Rechargeable nickel-cadmium (Ni-Cd) battery pack.

Optional Keys For Telephone Calls

NOTE: Refer to "Additional Phone Mode Information" for more information on the following keys.
0-9, *, #
Used for dialing a telephone number.
PHON (Phone)
Enables and disables the phone mode.
SEND
Transmits the telephone number in the display. This key can also be used to select the phone mode.
NOTE: The next three keys are multiple function keys which operate as follows in the phone mode and as
described in the preceding section when in the standard mode.
STO (SCN)
Stores a number in memory. Press this key and then a number key from 1-7 to store the number in the display in
that memory location.
CLR (LCK)
Erases the last digit in the display. Holding this key causes the function to repeat. Pressing RCL and then CLR
erases the entire number in the display.
RCL (RTN)
Recalls numbers from memory. Pressing this key repeatedly steps through the numbers stored in memory. Pressing
this key and then a number key from 1-7 recalls the number stored in that location.