Speaking Into Microphone; Operation At Extended Range; Transceiver Service - E.F. Johnson Company MULTI-NET II Quick Reference Manual

Speaking Into Microphone

For best results, hold the speaker grille about l-2 inches away from your mouth and speak slowly and distinctly at a
normal conversational level. Do not shout since it distorts your voice and does not increase range. Make sure the push-
to-talk switch is pressed before you begin to speak and released as soon as the message is complete.

Operation At Extended Range

When approaching the limits of radio range, the other party may not always hear your transmissions and there may
be an increase in background noise when messages are received. Communication may be improved by moving to higher
ground or away from shielding structures such as tall buildings and hills.
Licensing
To operate this transceiver on the air, it is usually necessary to file the proper license application. Your system
operator will provide you with information on what you may have to do to meet licensing requirements.

Transceiver Service

If the transceiver is not operating properly, "SYN ERR" or "PROG ERR" may be displayed. It is also
possible that all segments of the display are indicated when power is turned on. To attempt to clear this condition,
turn the power off and then on again to reset the control logic. Also make sure that the battery is charged, the
controls are properly set, and the antenna is tight. If the transceiver still does not operate properly, contact your
system operator for service.
NOTE: There are no user-serviceable components in this transceiver. Altering internal adjustments can void the
warranty and cause illegal emissions, and result in improper operation that can seriously damage the transceiver.
Part No. 8585-378
3-98hph
Printed in U.S.A.
NOTES