Table of Contents
Advertisement
KNOW YOUR 4 SLICE TOASTER
A.
Pop up Lever with High Lift Option
B.
7 Setting Browning Control
C.
Defrost Button
HOW TO USE YOUR 4 SLICE TOASTER
1.
There are 2 browning control buttons and 2 pop-up levers to operate the toasting slots as
separate pairs. Operate one or both pairs of toasting slots at the same time.
2.
Make sure that the 2 crumb trays are always in place in the base of the toaster as they also
protect the surface it is standing on from the heat of the elements in the toasting slots.
3.
Insert the plug into the mains electrical supply and switch on at the socket.
4.
Place the bread to be toasted in the wide toasting slots.
5.
Turn the browning control to the required setting. The browning control sets the time that the
toaster will operate. '1' is for light toasting and '7' is for the darkest toast.
6.
Push the pop-up lever down until it clicks into position.
7.
The bread will be lowered and centred as the lever moves down. The 'Cancel' button will
illuminate blue while the toaster is in use.
8.
Once the selected toasting cycle is complete he pop -up lever will release, automatically
lifting the toast The 'Cancel' button light will go out.
9.
To lift the toast further out of the slot, lift the pop-up lever to the highest position.
NOTE:
Since the toast will be hot, use caution when removing it from the toaster.
The toaster surface will get hot during use, especially near the toasting slots, so always allow the
.
D.
Reheat Button
E.
Cancel Button
F.
Wide Toasting Slots
t
3
Advertisement
Table of Contents
