Connecting Mxo2 Le To Your Mac System - Matrox MXO2 Installation And User Manual

30

Connecting MXO2 LE to your Mac system

Connect MXO2 LE to your Mac Pro or MacBook Pro using the Matrox PCIe
cable. For MXO2 LE to be detected on a Mac Pro system, power must be
supplied to MXO2 LE (see
connected to your Mac Pro before starting up your computer.
¡ Important Do not disconnect the Matrox PCIe cable from the adapter, or
MXO2 LE, when your Mac system is running. To safely remove the Matrox PCIe
host Expresscard/34 adapter, see
adapter"
A
Chapter 5, Connecting External Devices to Matrox MXO2 LE
"Powering MXO2 LE"
on page 8.
PCIe cable
Matrox PCIe
host adapter
A
on page 28), and it must be
"Removing your PCIe host ExpressCard/34
²Caution Ensure proper orientation
when connecting the PCIe cable to avoid
damaging the cable or host connector.
Matrox PCIe host
ExpressCard/34
adapter
OR
To your MacBook Pro's
ExpressCard/34 slot (see
your PCIe host ExpressCard/34
adapter (for laptops)"
MXO2 LE
(side view)
"Installing
on page 7).