Table of Contents
Advertisement
KNOW YOUR 2 SLICE TOASTER
A.
Pop up Toast Lever
B.
Browning Control
C.
Stop Button
D.
Reheat Button
HOW TO USE YOUR 2 SLICE TOASTER
1.
Make sure that the crumb tray is always in place in the base of the toaster as it also protects the
surface it is standing on from the heat of the elements in the toasting slots.
2.
Insert the plug into the mains electrical supply and switch on at the socket.
3.
Place the bread to be toasted in the wide toasting slot/s.
4.
Turn the browning control to the required setting. The browning control sets the time that the
toaster will operate. '1' is for light toasting and '7' is for the darkest toast.
5.
Press the pop-up lever down until it clicks into position.
6.
The bread will be lowered and centred as the lever moves down. The bottom 'Stop' button will
illuminate blue while the toaster is in use.
7.
After the toasting time has elapsed, the pop-up lever will be released automatically, lifting the
toast. The 'Stop' button light will go out.
8.
To lift the toast further out of the slot, lift the pop-up lever to the highest position.
NOTE:
Since the toast will be hot, use caution when removing it from the toaster.
•
The toaster surface will get hot during use, especially near the toasting slots, so always allow
•
the appliance to cool down before touching it.
Always disconnect the appliance from the mains electrical supply when not in use.
•
Do not use a knife, fork or other utensil to remove the bread from the toaster or to clean the
•
toaster. If the bread becomes lodged in the toaster, unplug the toaster before attempting to
remove it.
E.
F.
G.
3
Defrost Button
Bagel Button
Wide Toasting Slots
Advertisement
Table of Contents
