Safety Harness - Baby Jogger city mini GT Assembly Instructions Manual

saFety harness

to adjust harness height:
1
Unclip top of shoulder strap
from the seat and re-clip on
the pair of seat loops closest
to child's shoulder height.
to buckle:
3
Fasten both shoulder strap buckles
into the crotch strap buckle. The
buckles should always be clicked
into place before use.
note: If you have special harness requirements and wish to attach
your own harness, then there are D rings provided on the
waist harness for the attachment of your alternative harness
system. The alternative harness system must conform to
BS EN 13210:2004.
to adjust harness length:
1
Pull shoulder pads down close to main harness buckle.
2
Hold the plastic guide and pull the strap end to tighten
or pull the upper harness strap to loosen.
to unbuckle:
4
Press both sides of the
shoulder buckles to
release them from the
crotch buckle.
Warning:
Always use the
crotch strap in
combination with
the shoulder straps
and waist belt.
Warning:
Avoid serious
injury from falling
or sliding out.
Always properly
adjust and fasten
safety harness.
7