Converting Instructions - Electrolux T5290 Installation Manual

8.6 Converting instructions

Not applicable for Japan.
Disconnect the power to the machine.
Demount the lower back panel.
Remove the nozzle (1).
Mount the new supplied nozzle.
1
21
Loosen the measuring branch screw (2) 1/4 turn; connect a manometer to the measuring branch.
Connect the power to the machine and select a program with heat.
Start the machine.
Set the correct nozzle pressure according to the table on setting screw (4) under the cover screw (3).
22
Gas connection
fig.7127
fig.7120
27