SERVICE MANUAL
Separation Assembly Components
Component
SLIDE BASE MOTOR
SLIDE BASE SOLENOID
SEPARATION ARM
SOLENOID
FILM SUCTION
SENSOR
SLIDE BASE POSITION
SENSOR
GUIDE ROLLER
SLIDE BASE
SUCTION PAD
2–46
It is not necessary to remove the SEPARATION ASSEMBLY from the BASE
PLATE to remove these components.
Remove both GUIDE ROLLERS.
• Remove the LINK MECHANISM with the SLIDE BASE.
• Keep the WASHERS.
It is not necessary to remove the SEPARATING UNIT to remove the SUCTION
PAD.
Replacement Notes
10FEB97 – SM3226-1