Jensen Phase Linear UV10 Instruction Manual page 16

2. Touch an on-screen preset button (6) to select the
corresponding stored station.
P1 87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1MHz
P5 107.9MHz
P6 102.9MHz
Auto Store/Preview Scan (AS/PS)
Auto Store (AS)
To select six strong stations and store them in the current
band:
1. Select a band (if needed).
2. Touch the AS button (23) on page 2/2 of the on-screen
controls to activate the Auto Store function.
The new stations replace stations already stored in that band.
Preview Scan (PS)
To scan the AM or FM band for a preview of available stations
in your particular area, touch the PS button (20). Touch again
to stop preview scan.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a
strong local radio signal are played. To activate the Local
function in AM/FM tuner mode, press and hold the rotary
encoder button (11) on the front panel. Press and hold the
rotary encoder again to turn Local off. When the Local
function is active, the LOC indicator at the top of the screen is
illuminated.
12
UV10