Honda MSX125 User Manual page 56

3. Place a drain pan under the drain bolt.
4. Remove the oil fill cap/dipstick, drain
bolt, and sealing washer to drain the oil.
u Discard the oil at an approved
recycling centre.
Drain bolt Sealing washer
5. Install a new sealing washer onto the
drain bolt.
6. Install the drain bolt and tighten.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft).
7. Fill the crankcase with the recommended
oil (
dipstick.
Required oil
When changing oil:
8. Check the oil level.
9. Check that there are no oil leaks.
http://www.motorcycle.in.th
Engine Oil u Changing Engine Oil
P. 41) and install the oil fill cap/
2
0.9 litres (1.0 US qt, 0.8 Imp qt)
P. 51
2
53