Honda MSX125 User Manual page 78

Installation
1. Attach the side collars to the wheel.
2. Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the wheel hub and
right fork leg.
NOTICE
When installing the wheel, carefully fit the brake disc
between the pads to avoid scratching them.
3. Tighten the front axle nut.
Torque: 54 N·m (5.5 kgf·m, 40 lbf·ft).
4. After installing the wheel, apply the
brake lever several times, then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
http://www.motorcycle.in.th
Tyre Puncture u Removing Wheels
75