Table of Contents
Advertisement
SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS
Lenticular Screen and Fresnel Lens Installation
Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High humidity may
deform the Lenticular Screen and Fresnel Lens.
1. Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown
below. Refer to the table below for the tape length.
2. Sandwich the Fresnal Lens and Lenticular Screen together. The Lenticular Screen label must be towards
the front and the Fresnel Lens label towards the rear. (Figure 4)
3. Apply pressure at the top edge to bond the screens together.
4. Reverse the Screen Removal procedure and insert the screens in the Screen Fame Assembly.
*X INCHES - refer to the Tape Length in the table be
MODEL
WS-52526
WS-62526
MODEL: WD-52526 / WD-62526
Figure 4: Installing the Fresnel Lens & Lenticular Screen
SCREEN SIZE
55 inch
65 inch
Page 24
TAPE LENGTH
46.3 inches
55.1 inches
Advertisement
Table of Contents
