Light Engine Replacement
Preliminary
Refer to the chassis removal procedure and remove the BACK-COVER and Metal Support Plate (page 8)
Light Engine Removal Procedure
The following steps describe how to remove the Light
Engine from the cabinet and those parts that are not
included in a replacemant Engine
2) Remove fixing screws (1) & (2) to remove
the SLIDE-LOCK-MATE
MODEL: WD-525276 / WD-62526
1) Remove (3)* screws (a) from Filter Cover Holder
Light Engine (Rear View)
3a) Loosen [A-1] & [A-2] so that they do not
touch [A-3]. (4MM Allen wrench)
3b) Loosen lock nuts (1) and (2). (8MM open
end wrench)
3c) Turn [A-3] CCW so the [A-3] bolt clears the
Engine Plate. (5MM Allen wrench)
Page 18
(a)
(a)
(a)