Light Engine Adjustment; Test Signal Activation; Preliminary - Mitsubishi Electric WD-52526 Service Manual

Light Engine Adjustments

Test Signal Activation

1) Press "MENU-2-4-5-7" (Service Mode)
2) Press "REW" (Test Pattern).
Red = 4% overscan
White = 5% overscan
Green = 6% overscan
Cyan = 7% overscan
Yellow - 10 overscan
Prelminary (refer to the diagram below)
1) Remove Back Board
2) Loosen Fixing Screws (1) and (2) in the Slide Lock Mate
3) Loosen Nuts (1) and (2) on the Adjuster
4) Loosen [A-1] and [A-2] on the Adjuster
MODEL: WD-52526 / WD-62526
Light Engine (Rear View)
Page 30