Hyundai Genesis Coupe Owner's Manual page 37

Safety features of your vehicle
Belt guide
The belt guide is used to improve access
to the seat belt and to allow access to the
rear seat.
When fastening your seat belt, position
the seat belt near the belt guide then
bring the guide strap around the seat belt
and snap the belt guide to the seat bot-
tom as indicated in the illustration.
The belt guide is secured to the side
shield by using the magnet(1) on the
guide strap.
3 18
OBK039053
C020200BBH-EU
Pre-tensioner seat belt
Your vehicle is equipped with driver's and
front passenger's pre-tensioner seat
belts. The purpose of the pre-tensioner is
to make sure that the seat belts fit tightly
against the occupant's body in certain
frontal collisions. The pre-tensioner seat
belts may be activated in certain frontal
collisions.
When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
into position. In certain frontal collisions,
the pre-tensioner will activate and pull
the seat belt into tighter contact against
the occupant's body.
If the system senses excessive tension
on the driver or passenger's seat belt
when the pre-tensioner activates, the
load limiter inside the pre-tensioner will
release some of the pressure on the
affected seat belt.
OED030300
WARNING
Do not put anything near the buck-
le. Placing objects near the buckle
can adversely affect the buckle pre-
tensioner and may increase the risk
of personal injury in the event of a
collision.
WARNING
For your safety, be sure that the
belt webbing is not loose or twisted
and always sit property on your
seat.