Scan - Motorola CP125 User Manual

SCAN

Your radio is equipped with the Scan feature,
allows you to monitor multiple channels and
receive calls that are transmitted on them.
The Gindicator appears on the LDC
•
screen while in scan mode.
Two types of scan are supported:
• Normal Scan – searches all channels
sequentially in the radio's scan list.
Start
Ch. 2
Normal Scan
Ch. 1
Home
• Priority Scan – allocates 50% of the scan-
ning time to the Priority Channel (the first
channel in the designated scan list).
Start
Ch. 1
During scan, when activity is detected that
meets the unsquelch condition, the radio stops
scanning and switches to that channel; the
G indicator and the channel number are
Ch. 3
displayed. When no activity is detected for a
pre-set time, the radio resumes scanning.
If your radio has switched to a non-priority
channel during Priority Scan, it still checks for
Ch. 4
activity on the priority channel. If activity is
detected there, the radio switches to the
priority channel.
The radio transmits on the Prime Channel, if
the PTT button is pressed during scanning. If
the radio has stopped scanning, and has
changed to a particular channel, all transmit
and receive activity is performed on that
channel.
Ch. 2 Ch. 1
Ch. 3
Channel 1 Prioritized
Home
Ch. 4
Ch. 1
17
English