Multifunction Display - Mercedes-Benz Comand Operator's Manual

Audio
Radio operation

Multifunction display

Press # at the COMAND control
unit to switch on COMAND.
Press c at the COMAND control
unit to switch to radio operation.
Press E or H repeatedly on the
multifunction steering wheel until you
see the set-up for the current
station on the display.
40
1
SP
FM1
97.1 FM
P82.85-9532-31US
1 Frequency band and the memory pre-
set, if applicable
2 "SP" - memory, appears if "Memory" in-
stead of "Frequency" has been selec-
ted in the "Vehicle" submenu
3 Frequency of the station selected
Repeatedly press F or G on the
multifunction steering wheel until the
desired station frequency appears.
2
3 The type of search depends on the set-
up for station selection in the "Vehicle"
submenu
"Memory" (SP) - the next saved sta-
tion is selected
"Frequency" - the next available
station is selected
Refer to "Control system" in chapter
"Controls in detail" in your vehicle's
operating instructions for further infor-
mation.
Press E or H at the multifunc-
tion steering wheel to display the next
or previous system.