Bang & Olufsen BeoLink User Manual page 13

Content
Application
Part no.
Miscellaneous
MASTER LINK
BeoLink Converter
BeoLink Converter consists of a control box and a mains lead.
1.5 m
BeoLink Converter is used when audio and video products with Master
Link and Audio Aux Link (datalink) have to be interconnected.
BeoLink Converter can be used in conjunction with both a video and an
audio master. BeoLink Converter features autoconfiguration, meaning
that it is able to detect automatically whether it is installed in a Master
Link audio or in a Master Link video system. Configuration takes place
when it is connected to the mains.
BeoLink Converter can also be used as ML-driver*, which means that it is
possible to connect e.g. a BeoCenter 2300 via the BeoLink Converter to
the Master Link and thereby distribute sound to all link room products
(see page 17).
BeoLink Converter is used in compatibility setups (see the section on
recommended compatibility setups, page 17).
1161166
1161266 (USA/CDN)
1161466 (old version)
Besides the parts included with the BeoLink Converter, the installation
requires a Master Link cable as well as plugs, sockets and junction boxes
(see the section on installation types, page 23).
*NOTE!
BeoLink Converter type no. 1161466 can not be used as ML-driver.
9