Bang & Olufsen BeoLink User Manual page 12

8
Content
Application
Part no.
Miscellaneous
MASTER LINK
BeoLink Video
BeoLink Video consists of a control box, a mains lead and a datalink cable.
Apart from this you need an coaxial cable from the HF outlet of the video
system in the main room. This cable is connected to the aerial input of the
link room TV.
BeoLink Video is used in link rooms where both sound and picture are
required via a Bang & Olufsen TV set.
With BeoLink Video it is possible to use all the sources in the main room.
In particular it is possible to operate SAT and V.TAPE but it is further
possible to watch a decoded programme from the TV set in the main
room. In addition, it is possible to operate all audio sources, thereby
using the speakers in Bang & Olufsen's TV sets for obtaining audio sound.
If you want even greater sound in the room you can connect Bang &
Olufsen's active speakers to the TV set.
BeoLink Video is connected to the TV set by means of the 7-pin datalink
cable and to the main room with a Master Link cable. Apart from this an
aerial installation is needed (see page 24).
1161566
Besides the parts included with the BeoLink Video, the installation
requires a Master Link cable as well as plugs, sockets and junction boxes
(see the section on installation types, page 23).