MSI MS-6391 User Manual page 58

Chapter 3
Drive A/B
The two items allow you to set the type of floppy drivers installed. Avail-
able options are [None], [360K, 5.25 in], [1.2M, 5.25 in], [720k, 3.5 in],
[1.44M, 3.5in], and [2.88M, 3.5in]. Default value for Drive A is [1.44M,
3.5in], and for Drive B is [None].
Video
This item allows you to set the type of video card. Available options are
[EGA/VGA], [CGA40], [CGA80], and [MONO]. Default value is [EGA/
VGA].
Halt on
This item allows you to set the type of errors that will cause system halt
on. Available options are [All Errors], [No Errors], [All, But Keyboard],
[All, But Diskette], and [All, But Disk/Key]. Default value is [All, But
Keyboard].
All Errors
No Errors
All, But Keyboard The system will halt on if any error happens.
All, But Diskette
All, But Disk/Key The system will halt on if any error happens.
Base/Extended/Total Memory
The three items show the memory status of your system (read only).
The system will halt on and display the error
message if any error happens.
The system will not halt on no matter any
error happens.
But the system will not halt on if the keyboard
function is not normal.
The system will halt on if any error happens.
But the system will not halt on if the disk drive
function is not normal.
But the system will not halt on if the disk drive
and keyboard function is not normal.
3-8