TP-Link TL-WR941N User Manual page 53

clients via the next screen (shown in Figure 4-27 ).When you specify a reserved IP address for a
PC on the LAN, that PC will always receive the same IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to the servers that require permanent
IP settings.
MAC Address - The MAC address of the PC for which you want to reserve IP address.
Assigned IP Address - The IP address of the Router reserved.
Status - The status of this entry either Enabled or Disabled.
To Reserve IP addresses:
1. Click the Add New ... button. (Pop-up Figure 4-28 )
2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address in dotted-decimal
notation of the computer you wish to add.
3. Click the Save button when finished.
Figure 4-28 Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/ Disabled All button to make all entries enabled/disabled
Click the Delete All button to delete all entries
TL-WR941N/TL-WR941ND
Figure 4-27 Address Reservation
-46-
Wireless N Router