Display Language; Wall Mounting; Belt Clip - Panasonic KX-TGA641 Installation Manual

TGA641(e).fm Page 5 Wednesday, November 19, 2008 9:56 AM
2
Handset:
Press {OK}, then wait until a long beep sounds.
Note:
L If an error tone sounds, or if _ is still displayed, register the handset
according to the base unit's operating instructions.

Display language

1
{MENU} i {#}{1}{1}{0}
2
{V}/{^}: Select the desired setting.
3
Press the middle soft key to save. i {OFF}

Belt clip

N To attach

Wall mounting

1
Drive the screws (not supplied) into the wall.
2
Mount the charger (A), then slide it down (B) and to the right (C)
until it is secure.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
For assistance, please visit http://www.panasonic.com/help
N To remove
A
B
C
5