Mounting; Connecting Cables - Cobra CPI 480 Operating Instructions Manual

Mounting and

Connecting Cables

Installation

Mounting

To mount your inverter:
1. Place the inverter on a flat surface with the mounting
bracket against the mounting surface.
Mounting Brackets
2. Mount to secure surface using mounting hardware
that is corrosion resistant (not included).
Mounting Hardware
The inverter can be mounted horizontally or vertically.
Connecting Cables
Power wire and wiring are very important to the
performance of the inverter. Because the inverter has a
low voltage, high current input, low resistance wiring is
essential between the battery and inverter. This is so it
can deliver the maximum amount of energy to the load.
Only use the cables provided with your power inverter.
On/Off Switch to Off
6
To connect the cables between
the inverter and the battery:
1. Turn the On/Off Switch on the
inverter to the off position. If the
power source is a DC power
supply, switch it off as well.
•
•