Installation Of Kit Parts - Honda EM50is Owner's Manual

12.

INSTALLATION OF KIT PARTS

STANDARD KIT PARTS
Wheel Kit Installation
Do not operate the generator without the wheel kit installed. The
wheel kit provides an air space between the ground and the generator
air intake.
If the wheel kit is not installed, it may be possible for dirt and debris to
be drawn into the generator air intake causing possible generator
damage. Always operate the generator with the wheel kit installed.
1. Install the two wheels on the axle shaft using the washers and cotter
pins.
2. Install the axle assembly on the generator using four 8
flange bolts.
3. Install the two stands on the under frame using four 8
flange bolts.
TORQUE: 24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)
8 16 mm
FLANGE BOLT (4)
STAND (2)
WHEEL (2)
8 16 mm
FLANGE BOLT (4)
58
INSIDE
IN
LONGER
AXLE
20 mm WASHER (2)
4.0 28 mm COTTER PIN (2)
16 mm
16 mm